Konektor Kabel Coaxial RG8
Konektor Kabel Heliax RG8
Konektor kabel heliax coaxial RG8 CNT400 ANDREW 400PNR-C atau konektor tipe N Right Angle Male di aplikasikan pada kabel coaxial RG8 CNT400 ANDREW.
Konektor kabel coaxial RG8 CNT400 ANDREW 400PNR-C atau konektor tipe N Right Angle Male berbentuk huruf L atau bengkok, tersedia juga merk LEONI, RFS, ROSENBERGER, dsb. Konektor kabel feeder RG8 CNT400 ANDREW 400PNR-C atau konektor tipe N Right Angle Male tersedia di toko kami.
400PNR-C Type-N Male Clamp Connector, Right Angle, Hex Nut, Captivated Pin
Cable Group I,
Cable Type: CNT400, LMR400
Body: NIckel
Pin: Gold
Die: PTFE
MFR: Andrew
| General Specifications | |
| Interface | N Male |
| Body Style | Right angle |
| Brand | CNT® |
| Electrical Specifications | |
| Operating Frequency Band | 0 – 6000 MHz |
| Cable Impedance | 50 ohm |
| Connector Impedance | 50 ohm |
| RF Operating Voltage, maximum (vrms) | 707.00 V |
| dc Test Voltage | 2500 V |
| Outer Contact Resistance, maximum | 0.25 mOhm |
| Inner Contact Resistance, maximum | 1.00 mOhm |
| Insulation Resistance, minimum | 5000 MOhm |
| Average Power | 580.0 W @ 900 MHz |
| Peak Power, maximum | 10.00 kW |
Insertion Loss, typical  | 0.05 dB |
| Outline Drawing | |
 Click on image below to enlarge. | |
| Mechanical Specifications | |
| Outer Contact Plating | Silver |
| Inner Contact Plating | Silver |
| Outer Contact Attachment Method | Clamp |
| Inner Contact Attachment Method | Captivated |
| Interface Durability | 500 cycles |
| Interface Durability Method | IEC 61169-16:9.5 |
| Connector Retention Tensile Force | 330 N | 74 lbf |
| Connector Retention Torque | 0.75 N-m | 0.56 N-m |
| Coupling Nut Proof Torque | 1.70 N-m | 1.25 ft lb |
| Coupling Nut Proof Torque Method | IEC 61169-16:9.3.6 |
| Coupling Nut Retention Force | 450.00 N | 101.16 lbf |
| Coupling Nut Retention Force Method | IEC 61169-16:9.3.11 |
| Dimensions | |
| Nominal Size | 0.405 in |
| Height | 35.69 mm | 1.41 in |
| Length | 49.28 mm | 1.94 in |
| Weight | 135.00 g | 0.30 lb |
| Width | 22.33 mm | 0.88 in |
| Environmental Specifications | |
| Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
| Storage Temperature | -65 °C to +125 °C (-85 °F to +257 °F) |
| Immersion Depth | 1 m |
| Immersion Test Mating | Mated |
| Immersion Test Method | IEC 60529:2001, IP68 |
| Mechanical Shock Test Method | IEC 60068-2-27 |
| Climatic Sequence Test Method | IEC 60068-1 |
| Damp Heat Steady State Test Method | IEC 60068-2-3 |
| Thermal Shock Test Method | IEC 60068-2-14 |
| Vibration Test Method | IEC 60068-2-6 |
| Corrosion Test Method | IEC 60068-2-11 |
| Standard Conditions | |
| Attenuation, Ambient Temperature | 20 °C | 68 °F |
| Average Power, Ambient Temperature | 40 °C | 104 °F |
| Average Power, Inner Conductor Temperature | 100 °C | 212 °F |
